ওয়াই-ফাই কিউআর কোড বিনামূল্যে তৈরি করুন
২০-অক্ষরের পাসওয়ার্ড টাইপ করার ঝামেলা ছাড়াই অতিথি-ওয়াই-ফাই। একটি স্ক্যান, এক সেকেন্ড, ইন্টারনেট। বাড়ি, ক্যাফে, হোটেল, অফিস বা ছুটির অ্যাপার্টমেন্টের জন্য আদর্শ।
ওয়াই-ফাই কেন কিউআর কোডের মাধ্যমে?
পরিস্থিতিটা সবার জানা: অতিথি আসে, ওয়াই-ফাই জানতে চায়, আর তুমি অক্ষরে অক্ষরে বলো "M5jk-Großhans-2024-Internet"। ওয়াই-ফাই কিউআর কোড দিয়ে এই ঝামেলা আর হবে না:
- অতিথি স্ক্যান করে → অনলাইন। কোনো টাইপিং নেই, কোনো ভুল বানান নেই।
- Password stays hidden: Guests don't have to type it in. However, when scanning, the phone can read it, so use a guest network.
- iOS ও Android-এ সরাসরি: iOS 11 ও Android 10 থেকে ক্যামেরা-অ্যাপ ওয়াই-ফাই কিউআর কোড স্বয়ংক্রিয়ভাবে চিনে নেয়।
- একবার তৈরি করুন — চিরকালের জন্য: ওয়াই-ফাই পাসওয়ার্ড একই থাকলে কিউআর কোডও বৈধ থাকে।
- অফলাইনেও কাজ করে: স্ক্যান প্রক্রিয়ায় ইন্টারনেটের প্রয়োজন নেই — ওয়াই-ফাই পাসওয়ার্ড কিউআর কোডের ভেতরেই এনকোড করা থাকে।
৩০ সেকেন্ডে অতিথি-ওয়াই-ফাই কিউআর কোড
- ওয়াই-ফাইয়ের নাম (SSID) লিখুন: রাউটারে যেভাবে লেখা আছে ঠিক সেভাবে (বড় ও ছোট হাতের অক্ষর গুরুত্বপূর্ণ)।
- পাসওয়ার্ড লিখুন: রাউটারে যেমন আছে ঠিক তেমন। এটি দেখানো হয় না — শুধু কিউআর কোডের ভেতরে এনকোড হয়।
- এনক্রিপশন বেছে নিন: WPA/WPA2/WPA3 (ডিফল্ট), WEP (পুরোনো) অথবা „কোনো পাসওয়ার্ড নেই“ (খোলা নেটওয়ার্ক)।
- „লুকানো ওয়াই-ফাই“: তোমার SSID-ব্রডকাস্ট বন্ধ থাকলে এটি সক্রিয় করো।
- কিউআর তৈরি ও প্রিন্ট করুন: টেবিলের জন্য: 5×5 সেমি। দেয়াল/প্রবেশপথের জন্য: 10×10 সেমি।
ওয়াই-ফাই কিউআর কোড কোথায় রাখব?
- বাড়িতে: ফ্রিজে ম্যাগনেট বা দেয়ালে ফ্রেমে।
- ক্যাফে/রেস্তোরাঁ: প্রতিটি টেবিলে (মেনু কার্ডের সঙ্গে যুক্ত করে)।
- হোটেল: রুমে ডেস্কের উপর বা কার্ড-স্ট্যান্ডে।
- অফিস: অতিথিদের জন্য রিসেপশনে।
- ছুটির অ্যাপার্টমেন্ট: স্বাগত-ফোল্ডারে — অতিথিরা খুশি হবেন।
- কো-ওয়ার্কিং স্পেস: প্রবেশপথের পাশের দেয়ালে।
পেশাদার টিপস: তোমার রাউটারে একটি আলাদা অতিথি-নেটওয়ার্ক তৈরি করো (FRITZ!Box, Speedport ইত্যাদিতে এটি অন্তর্নির্মিত থাকে) এবং শুধু সেটির জন্য একটি কিউআর তৈরি করো। তোমার মূল ওয়াই-ফাই ব্যক্তিগত থাকবে।
Practical example: the guest Wi-Fi of a holiday apartment
A landlady wants guests to get online without having to ask. Her own network should remain private. This is how she does it, and you can do the same at home, in a practice or in an office.
- Set up a separate guest network in the router. Most common routers offer this in their settings.
- Give it a clear network name without special characters, for example "Holiday-Guest".
- Choose a password that you can change easily. It does not have to be short, because it is never typed in.
- Open our generator, select the Wi-Fi type and enter the name and password exactly as they appear in the router. Pay attention to upper and lower case.
- Select the encryption that the router uses for the guest network. If in doubt, it is shown in the router's interface.
- Download the code as a PDF or SVG and print it in the size you need.
- Scan it with a phone that has never been on the network and check whether the connection is established.
Only when this test works should the code go into the folder or the frame. This way you find typos in the name before a guest notices them.
Which settings in the generator really matter
A Wi-Fi code contains the network name, the password and the encryption. The phone only connects if all three match the router exactly. A single wrong letter leads to an error message that looks to the guest like a defective code.
- Network name: It must match character for character. A space at the end or a difference between upper and lower case is enough to cause an error.
- Password: The longer it is, the finer the pattern becomes. A password made of several random words is secure and still easy to scan.
- Encryption: Use the one your router uses for the guest network. The wrong type prevents the connection.
- Hidden network: Only turn this option on if the router really does not broadcast the name.
- Error correction: Level M is sufficient for printed codes without a logo. For Wi-Fi codes, it is better to leave out a logo so that nothing gets in the way.
- Format: PDF or SVG for table stands and frames, PNG only for screens.
If the password changes, the old code is useless. You then create a new one and replace all printed copies. That is why you should note where every code is displayed.
For comparison: a short password produces a coarser pattern, a long one a finer pattern. For guest networks, a long password is still the better choice, as long as you print the code large enough.
Size, material and placement for table, wall and room
The scanning distance determines the size. Divide it by ten and you get the width of the code. On a table, the phone is usually held at a distance of thirty to forty centimeters, for which about three to four centimeters are enough. On a wall, at a distance of one meter, you need about ten centimeters.
- Table stand: About five centimeters is comfortable. Do not place it next to candles or reflective surfaces.
- Wall frame: Hang it at eye level, not behind glass that reflects windows or lamps. Anti-reflective glass or a print without a glass cover is better.
- Folder in the room: Place the code on a flat page, not in a glossy brochure sleeve.
- Laminating: Use a matt film. Glossy film reflects the light.
- Paper: Matt paper, dark ink on a light background. A light code on dark paper is not recognized by some scanners.
- Quiet zone: At least four squares of free, light border all around, including on the card.
A test print is still essential. Hang the sample where it will later be displayed, and scan from there with two phones.
Security and common mistakes with the Wi-Fi code
A Wi-Fi code contains the password. Anyone who scans it can read it with suitable apps. That is why you should only put a guest network into a code that has no access to your devices. Your main network stays without a code. This is not security advice, just a simple principle.
- Main network in the code: Every guest could read the password. Solution: use a separate guest network.
- Typo in the name: The scan works, but the connection does not. Solution: copy the name from the router's interface.
- Password changed, code forgotten: Solution: create a new code after every change and throw away the old printouts.
- Wrong encryption: Solution: select the same setting as in the router.
- Notice in public places: Anyone within range can connect to the network. Solution: place the code only where guests are actually present, and change the password regularly.
তোমার ওয়াই-ফাই কিউআর কোডের জন্য প্রস্তুত?
৩০ সেকেন্ডে তৈরি, যেকোনো কার্ড বা স্টিকারে প্রিন্ট করার উপযোগী।
এখনই ওয়াই-ফাই কিউআর তৈরি করুন →সাধারণ প্রশ্নাবলি
কোন ডিভাইসগুলো ওয়াই-ফাই কিউআর কোড পড়তে পারে?
iPhone iOS 11 (২০১৭) থেকে, Android ডিভাইস Android 10 (২০১৯) থেকে। পুরোনো ডিভাইসে: কিউআর স্ক্যান → পাসওয়ার্ড দেখানো হয়, ম্যানুয়ালি ওয়াই-ফাইতে লিখে দিন।
কোন এনক্রিপশন বেছে নেব?
WPA/WPA2/WPA3 for modern routers (the usual case). WEP only for very old routers. "No password" for open hotspots.
Hidden SSID-এর সাথে কি এটি কাজ করে?
হ্যাঁ — "লুকানো ওয়াই-ফাই" বিকল্পটি সক্রিয় করুন। তখন SSID-নাম স্পষ্টভাবে এনকোড হয়, যদিও এটি ব্রডকাস্ট করা হয় না।
আমার পাসওয়ার্ড কি কোনো সার্ভারে পাঠানো হয়?
না। easyfreeqr.com-এ সবকিছু ব্রাউজারেই তৈরি হয়। তোমার পাসওয়ার্ড কখনোই তোমার ডিভাইস ছেড়ে যায় না — কিউআর তৈরির সময়ও না।
What happens if I change the Wi-Fi password?
Then the old code no longer works, because our codes are static and their content cannot be changed afterwards. You create a new code with the new password and replace the printed copies. Make a note beforehand of every place where a code is displayed.
Can a guest see my password?
The password is stored inside the code. Anyone who scans it can extract it with the right tool, even if the phone does not show it. That is why you should use a guest network with a password you don't use anywhere else, and change it from time to time.
Why doesn't the phone connect even though the scan works?
Usually one detail in the code does not match the router: a typo in the network name, the wrong upper and lower case, or a different encryption type. Open the router's interface, compare the characters one by one, and regenerate the code if necessary.