Create a WiFi QR code for free
Guest WiFi without typing 20-character passwords. One scan, one second, internet. Perfect for home, café, hotel, office or vacation apartment.
Why WiFi via QR code?
Everyone knows the situation: a guest arrives, asks for the WiFi, and you spell out "M5jk-Großhans-2024-Internet" letter by letter. With a WiFi QR code, that never happens again:
- Guest scans → is online. No typing, no typos.
- Password stays hidden: Guests don't have to type it in. However, when scanning, the phone can read it out, so use a guest network.
- Native on iOS and Android: Since iOS 11 and Android 10, the camera app automatically recognizes WiFi QR codes.
- Generate once — for good: As long as the WiFi password stays the same, the QR code remains valid.
- Works offline: The scan itself requires no internet connection — the WiFi password is encoded in the QR code.
Guest WiFi QR code in 30 seconds
- Enter the WiFi name (SSID): Exactly as it appears in the router (upper and lower case matter).
- Enter the password: Exactly as in the router. It is not displayed — it is only encoded in the QR code.
- Choose encryption: WPA/WPA2/WPA3 (standard), WEP (old) or "No password" (open network).
- "Hidden WiFi": Enable this if your SSID broadcast is turned off.
- Generate & print the QR code: For tables: 5×5 cm. For walls/entrances: 10×10 cm.
Where should I place the Wi-Fi QR code?
- At home: A magnet on the fridge or a frame on the wall.
- Café/restaurant: On every table (combined with the menu).
- Hotel: In the room on the desk or as a card stand.
- Office: At reception for visitors.
- Holiday apartment: In the welcome folder — guests will appreciate it.
- Coworking space: On the wall next to the entrance.
Pro tip: Set up a separate guest network in your router (FRITZ!Box, Speedport and others have this built in) and create a QR code only for it. Your main WiFi stays private.
Example: the guest Wi-Fi of a holiday apartment
A landlady wants guests to get online without having to ask. Her own network should stay private. She proceeds as follows, and you can do the same at home, in a practice, or in an office.
- Set up a separate guest network on the router. Most common routers offer this in their settings.
- Give it a clear network name without special characters, for example "Holiday-Apartment-Guest".
- Choose a password that you can change easily. It doesn't have to be short, because it is never typed in.
- Open our generator, select the Wi-Fi type and enter the name and password exactly as they appear in the router. Pay attention to capitalisation.
- Select the encryption that the router uses for the guest network. If in doubt, it is shown in the router's admin page.
- Download the code as a PDF or SVG and print it in the size you need.
- Scan it with a phone that has never been on the network and check whether the connection is established.
Only once this test works should the code go into the folder or the frame. This way you find typos in the name before a guest notices them.
Which settings in the generator really matter
A Wi-Fi code contains the network name, password and encryption. Only if all three match the router exactly will the phone connect. A single wrong letter leads to an error message that looks to the guest like a defective code.
- Network name: It must match character for character. A trailing space or a difference between upper and lower case is enough to cause an error.
- Password: The longer it is, the finer the pattern becomes. A password made of several random words is secure and still scans well.
- Encryption: Use the one your router uses for the guest network. A wrong type prevents the connection.
- Hidden network: Only enable this option if the router really does not broadcast the name.
- Error correction: Level M is sufficient for printed codes without a logo. For a Wi-Fi code, it's better to leave out the logo so nothing gets in the way.
- Format: PDF or SVG for table stands and frames, PNG only for the screen.
If the password changes, the old code is useless. Then create a new one and replace all printouts. That's why you should note down everywhere a code is hanging.
For comparison: a short password creates a coarser pattern, a long one a finer pattern. For guest networks, a long password is still the better choice, as long as you print the code large enough.
Size, material and placement for table, wall and room
The scanning distance determines the size. Divide it by ten and you get the width of the code. On a table the phone is usually held at a distance of thirty to forty centimetres, for which about three to four centimetres are enough. On a wall at a distance of one metre, you need about ten centimetres.
- Table stand: Around five centimetres is comfortable. Don't place it next to candles or reflective surfaces.
- Frame on the wall: Hang it at eye level, not behind glass that reflects windows or lamps. Anti-reflective glass or a print without a glass pane is better.
- Folder in the room: Place the code on a flat page, not in a glossy brochure sleeve.
- Laminating: Use a matte film. Glossy film reflects the light.
- Paper: Matte paper, dark ink on a light background. A light code on dark paper is not recognised by some scanners.
- Quiet zone: Leave at least four squares of free, light margin on all sides, including on the card.
A test print remains mandatory. Hold the sample at the place where it will finally hang, and scan from there with two phones.
Security and common mistakes with the Wi-Fi code
A Wi-Fi code contains the password. Anyone who scans it can read it out with suitable apps. Therefore, only put a guest network into a code that gives no access to your devices. Your main network stays without a code. This is not security advice, just a simple principle.
- Main network in the code: Every guest could read the password. Solution: use a separate guest network.
- Typo in the name: The scan works, but the connection doesn't. Solution: copy the name from the router's admin page.
- Password changed, code forgotten: Solution: after every change, create a new code and throw away the old printouts.
- Wrong encryption: Solution: choose the same setting as in the router.
- Notice in public places: Anyone within range can get onto the network. Solution: place the code only where guests really are, and change the password regularly.
Ready for your WiFi QR code?
Created in 30 seconds, printable on any card or sticker.
Create Wi-Fi QR code now →Frequently Asked Questions
Which devices can read WiFi QR codes?
iPhones with iOS 11 and newer (2017+), Android devices with Android 10 and newer (2019+). For older devices: scan the QR code → password is displayed, enter it into WiFi manually.
Which encryption should I choose?
WPA/WPA2/WPA3 for modern routers (the most common case). WEP only for very old routers. "No password" for open hotspots.
Does it work with hidden SSID?
Yes — enable the "Hidden WiFi" option. The SSID name will then be explicitly encoded, even if it's not being broadcast.
Is my password sent to a server?
No. At easyfreeqr.com, everything is created in your browser. Your password never leaves your device — not even when generating QR codes.
What happens if I change the Wi-Fi password?
Then the old code no longer works, because our codes are static and their content cannot be changed afterwards. You create a new code with the new password and swap out the printouts. Beforehand, note down everywhere a code is hanging.
Can a guest see my password?
The password is stored in the code. Anyone who scans it can read it out with the right tool, even if the phone doesn't display it. That's why you should use a guest network with a password you don't use anywhere else, and change it from time to time.
Why doesn't the phone connect even though the scan works?
Usually one detail in the code doesn't match the router: a typo in the network name, incorrect capitalisation, or a different encryption type. Open the router's admin page, compare character by character, and generate the code again if necessary.