Create QR Code with Logo

Your company logo right in the QR code — recognisable and professional. Free, no sign-up, done in 30 seconds.

BrandedHigher scan rateFreeSecure (no SVG)

Create QR with logo →

Why a logo in the QR code?

A QR code without a logo looks anonymous and generic. With your logo, it becomes part of your branding:

  • Instant recognition: Customers see your logo and trust the code (fewer "What is this?" hurdles).
  • Higher scan rate: A code with a logo stands out and looks more trustworthy than an anonymous one.
  • Professional impression: On business cards, posters, or packaging — the logo makes the difference.
  • Anti-spoofing: A logo helps customers tell your code apart from fake ones.

How it works technically

QR codes have built-in error correction (Reed-Solomon code). This means part of the QR area can be "missing" — the code remains readable. The levels:

LevelError Correction LevelRecommendation
L – Low7%No logo, clean print
M – Medium15%Very small logo
Q – High25%Logo up to ~20%
H – Maximum30%Recommended with logo

With a logo, it blocks part of the QR code. Error correction compensates for this. Rule of thumb: keep the logo small and choose level H, and the code usually stays readable. Always test.

How to build your logo QR code

  1. Enter content: URL, vCard, WiFi — whatever you need.
  2. Enable logo: Switch the "Insert logo into QR code" toggle to ON.
  3. Upload logo: PNG, JPG, or WebP. Max 2 MB. SVG is not allowed for security reasons.
  4. Set size: Slider from 20–50%. Recommended: 25–35%.
  5. Error correction "H": Automatically recommended as soon as the logo is enabled.
  6. Watch the quality indicator: The live display tells you whether the QR code is still scannable (Excellent/Good/Risky).
  7. Test it: Scan with an iPhone AND an Android device before the final download.

Common problems & solutions

  • "QR code won't scan" → Logo too large. Reduce to 25%. Set EC to "H".
  • "Logo blurry" → Low resolution. The logo should be at least 500×500 px. PNG > JPG.
  • "Logo invisible in the QR code" → The logo lacks contrast. Embedding the logo on a white background works better.
  • "Can't upload my logo" → File > 2 MB? Compress it with TinyPNG. Or SVG → which we block for XSS security reasons.

Case study: the bakery logo on the paper bag

A bakery wants to print a code on its paper bags that leads to its online ordering page. The logo should sit in the centre. Here is how it proceeds.

  1. It prepares the logo: cropped square, with clear edges and high resolution.
  2. It opens the generator, selects the website type, and enters the address of the ordering page.
  3. It turns on the logo and uploads the file.
  4. It sets error correction to level H.
  5. It starts with a small logo and only enlarges it as long as the code still scans reliably.
  6. It scans the on-screen code with two phones before downloading anything.
  7. It downloads the SVG or PDF, prints a sample on a bag itself, and tests again.

The test print matters, because paper, ink, and the curve of the bag all affect the result. On screen, the code often looks better than it does printed.

Save the finished settings in a short note: content, logo file, logo size, error correction. If the bakery prints a second bag later, the code takes minutes to create and looks exactly the same.

Which settings suit a code with a logo

The logo covers part of the pattern. Error correction compensates for this, but only up to a limit. Level H restores about 30%, level Q about 25%, level M about 15%, and level L about 7%. With a logo, choose level H.

  • Logo size: as small as possible, only as large as necessary. The smaller the logo, the greater the margin of safety.
  • Logo background: A light backdrop behind the logo separates it from the pattern and improves readability.
  • Short content: a short address produces a coarser pattern. This gives the logo more room.
  • Colours: dark pattern on a light background. The logo may be colourful, but the rest needs contrast.
  • Format: SVG or PDF for print, PNG for screens.
  • Logo rights: only use logos you are permitted to use. This is not legal advice.

If you change your logo later, regenerate the code and replace the printed version. A code that has already been created cannot be modified afterward.

Consider the shape of the logo. A round or square logo with clear edges covers the pattern evenly. A logo with fine lettering or thin lines becomes illegible in small print. In that case, a reduced image portion of the logo works better than the complete mark with wordmark.

Size, material, and printing: a code with a logo needs more space

A logo removes pattern, so print a code with a logo slightly larger than one without. The rule of thumb still applies: width roughly equals scanning distance divided by ten. For handheld scanning, at least about 2 × 2 cm is needed, and with a logo, 3 cm or more is better.

  • Business card: a logo in the code only makes sense if the code is large enough. Otherwise, leave the logo out.
  • Packaging: a flat, matte area, not on edges or folds.
  • Poster: about ten centimeters at one meter distance, about twenty at two meters.
  • Sticker: smooth surface, matte material, leave a light margin.
  • Quiet zone: keep at least four light modules on all sides.
  • Resolution: vector files stay sharp at any size. PNG needs at least 300 dpi for print. The logo itself should be available in high resolution so it doesn't look blurry.

Print each version in its original size as a test and scan with at least two phones before ordering large quantities.

The material matters too. On rough paper, the ink bleeds at the edges of the logo, and on foil it reflects light. For textiles, mug printing, or engraving, make the code larger as well, because fine squares are reproduced less reliably there. Ask your print shop which minimum line width they can reliably print.

The most common mistakes with codes that have a logo, and how to avoid them

  • Logo too large: the code no longer scans. Solution: reduce the logo size and set level H.
  • Error correction too low: with a logo, level L or M is not enough. Solution: level H.
  • Print too small: the pattern becomes fine, and the logo covers too much. Solution: print the code larger.
  • Logo without contrast: it disappears into the pattern. Solution: choose a light background or stronger colours.
  • Tested only on screen: it looks different in print. Solution: test print and two phones.

Another mistake: very long content. The pattern then becomes so dense that even a small logo causes problems. Shorten the content or link to a short address.

Ready for your branded QR code?

Logo upload, live quality indicator, all formats.

Create QR with logo →

Frequently asked questions

How large can the logo be in the QR code?

As small as possible. At level H, about 30% is restored, which is the upper limit for covered area, not the goal. Start small and test each size with two phones. Printed, a logo often looks larger than on screen.

Which error correction should I use for a code with a logo?

Level H. It restores about 30%, level Q about 25%, M about 15%, and L about 7%. With a logo in the centre, H is the safest choice, because the logo covers part of the pattern.

Can I swap the logo later?

No, our codes are static. Once created, neither the content nor the logo can be changed. You create a new code with the new logo and replace the printed version. If you want to change the content later, link to your own page that you can update yourself.

Which logo files can I upload?

Use an image file such as PNG, JPG, or WebP with clear edges and high resolution. A square crop with a light background works best. Only use logos you are permitted to use.

When is it better to leave the logo out?

With very long content, very small print, and surfaces that are strongly curved or glossy. In those cases, every bit of margin helps. A clean code without a logo scans more reliably in such situations than an attractive but less reliable one.

Related topics

→ Business card → Instagram → Packaging → Complete guide