QR code on product packaging

Instructions, warranty registration, reviews, recipes — directly on the packaging. Saves insert materials, communicates internationally.

Packaging-readyInternationalSaves insertsFree

Create product QR →

What you can communicate on packaging

Packaging is small and expensive to print. With a QR code, every package becomes a multifunctional information source:

  • Instructions: Instead of a thick paper insert in many languages, an online guide with a selection menu.
  • Warranty registration: The customer scans the code right after purchase and registers their warranty. You can collect warranty cases in one place.
  • Product review: "How satisfied are you?" — straight to Trustpilot or your own review system.
  • Recipe database: Food manufacturers link cooking recipes to their products.
  • Authenticity check: You can link to a page where you explain the original.
  • Cross-sell: "Recommended for this product: matching accessories in the shop."
  • Newsletter sign-up: "Stay informed about new products."
  • Recycling information: How should the packaging be disposed of correctly? Check which information is required for your product.

Best practices for packaging QR codes

  • Minimum size about 2 × 2 cm: For packaging that is held in the hand. Smaller only works with very sharp printing.
  • Placement: On the front or side surface, NEVER on a fold or curve. On a curved surface (e.g. a bottle), the QR code should be noticeably larger.
  • SVG for print: High resolution, sharp at every print size. Never JPG.
  • High contrast: Black on white or in the packaging's branding — but dark on light.
  • Matte material: Glossy paper reflects light. Especially critical for plastic packaging — test before a large print run.
  • CTA text: "Scan instructions", "Register warranty", "More recipes" — never just the bare QR code.
  • Multilingual note: For international products: "EN/FR/IT/ES" next to the QR code — users know the online page supports multiple languages.

Special packaging challenges

Glass bottle / curved surface

Curvature distorts the QR code. Solution: print the QR code larger (minimum 2.5 × 2.5 cm) and place it on the flattest part.

Film / cellophane

Glossy material reflects light. Solution: choose matte film or apply the QR code to a separate label.

Freezer packaging

Condensation forms on the surface when thawing. Solution: use smudge-resistant ink or print the QR code on an inner label (outside the film).

Example: A coffee tin with a preparation page

A small coffee roaster prints its tins. A code on the back leads to a page with brewing tips and recipes. The example shows the sequence that also applies to other packaging.

  1. Create a page for the product with a short address such as yourcompany.com/coffee. It contains instructions, recipes, and contact details.
  2. Check it on a phone. It must be readable without zooming and load quickly.
  3. In the generator, create a Website (URL) code with this address.
  4. Use dark dots on a light background. Only add a logo if there is enough space, and then set the error correction to H.
  5. Download the code as SVG or PDF and give the file to the print shop, never a scaled-down JPG.
  6. Place the code on a flat surface, with a phrase such as Scan for preparation, and a light border around it.
  7. Have a test print made on the real material, on the tin, foil, or cardboard, and scan it with two phones.

Only move on to the full print run once the test print on the real material scans reliably. Material, varnish, and curvature change the code more than any setting in the generator.

Which QR type and settings suit packaging

Packaging is small and space is expensive. That is exactly why it pays to keep the content of the code brief.

  • Website (URL): The standard for instructions, recipes, warranty, and product pages. A short address produces a coarser, more robust pattern.
  • Phone or email: Only useful if the customer should really be able to reach you directly. For instructions, a page is better.
  • WhatsApp: Good if customers should be able to ask questions. You then run the conversation yourself.
  • Error correction: Without a logo, level M with about 15% is sufficient. Packaging gets handled and scratched, so Q with about 25% is often a good compromise. With a logo, use H.
  • File format: SVG or PDF for printing. PNG only for screens, and only with at least 300 dpi at print size.
  • Colours: Dark on light. A code in brand colours works as long as the contrast stays high. Inverted, light codes are not read by some scanners.

Our codes are static. The printed destination cannot be changed. So link to a page that you maintain yourself. That way you can swap out instructions or recipes later without printing new packaging.

Size, surface, and material: tin, bottle, foil, cardboard

On packaging, the surface the code sits on is what matters. For scanning by hand, about 2 × 2 cm is the lower limit. Curves and foils require more.

  • Cardboard and folding carton: Matte-printed cardboard is the simplest material. Place the code on a flat side surface.
  • Fold and edge: Avoid creases. A crease splits the code across two planes, and the camera can no longer find it.
  • Bottle and tin: The curvature distorts the pattern. Make the code larger and place it on the flattest spot.
  • Foil and pouch: Gloss reflects. Choose matte foil or a matte label stuck on top. Creases destroy the pattern, so do not place the code over folds.
  • Quiet zone: Leave a light border of at least four modules all around. On colorful packaging, a white field under the code makes sense.
  • Small labels: If space is tight, shorten the address or use a larger label.

Print on the real material, not on office copy paper. Varnish, foil, and ink change how the camera sees the code. A pattern that looks flawless on screen can fail on the finished packaging.

The most common mistakes with packaging codes

Packaging is expensive to print and hard to correct. That is why caution pays off.

  1. The code sits on a curve or fold. Solution: choose a flat surface, print larger on curves, and test.
  2. The code has not been tested on the target material. Solution: test print on the real material before the full run.
  3. The page behind it is not built for phones. Solution: a simple, fast page that is readable on a smartphone.
  4. The address changes. Printed codes cannot be changed. Solution: choose an address you will keep permanently, and redirect it yourself if the page moves.
  5. The code stands alone. Customers do not know what is behind it. Solution: a phrase such as Scan for instructions, plus the address in plain text.

Before a large order, lay out two or three different patterns side by side, for example with and without a logo, or in two sizes. Scan them with several phones and choose the pattern that reads instantly everywhere.

QR for your product packaging

SVG download, with logo, print quality.

Create product QR →

Frequently asked questions

Can I change the code later if the packaging has already been printed?

No. Our codes are static, so their content cannot be changed after they are created. That is why you link to a page that you maintain yourself and can redirect if needed. That way you can swap out instructions, recipes, or contact details without printing new packaging.

Which file formats do I need for the print shop?

For printing, SVG or PDF is best because they stay sharp at any size. These are vector files. A PNG file is only meant for screens. If a print shop insists on PNG, it must have at least 300 dpi at the printed size.

Does the code work on glossy foil?

It can, but often not well. Gloss reflects light into the camera and disrupts the pattern. Matte material or a matte label on the foil is better. If there is no alternative, make the code larger, choose high contrast, and test the proof print under different lighting.

Related topics

→ Flyers → With logo → Reviews → E-commerce