Cruthaich còd QR WiFi an-asgaidh
WiFi aoighean gun facal-faire de 20 caractaran a sgrìobhadh. Aon sganadh, aon diog, lìonra. Foirfe airson dachaigh, cafaidh, taigh-òsta, oifis no fuaim-thaigh.
Carson WiFi le còd QR?
Tha fios aig a h-uile duine air an staid seo: thig aoigh, faighnichidh e mun WiFi, agus innsidh tu "M5jk-Großhans-2024-Internet" litir air litir. Le còd QR WiFi, cha tachair sin a-rithist:
- Sganaidh an t-aoigh → tha e air-loidhne. Gun sgrìobhadh, gun mhearachdan litreachaidh.
- Password stays hidden: Guests don't have to type it in. However, when scanning, the phone can read it out, so use a guest network.
- iOS agus Android gu nàdarrach: Bho iOS 11 agus Android 10 aithnichidh an aplacaid camara còdan QR WiFi gu fèin-obrachail.
- Cruthaich aon uair — gu bràth: Fhad 's a dh'fhanas facal-faire a' WiFi mar a tha e, fanaidh an còd QR dligheach.
- Obraichidh e far loidhne: Chan fheum an sganadh fhèin Intanet — tha facal-faire a' WiFi air a chrioptachadh anns a' chòd QR.
Gu còd QR WiFi aoighean ann an 30 diog
- Cuir a-steach ainm a' WiFi (SSID): Dìreach mar a tha e san ruwtair (tha meud nan litrichean cudromach).
- Cuir a-steach am facal-faire: Dìreach mar a tha e san ruwtair. Chan fhaicear e — thèid a chrioptachadh dhan chòd QR a-mhàin.
- Tagh an crioptachadh: WPA/WPA2/WPA3 (bunaiteach), WEP (sean) no "Gun fhacal-fhaire" (lìonra fosgailte).
- "WiFi falaichte": Cuir an comas ma tha do SSID-broadcast à comas.
- Gin an còd QR & clò-bhuail: Airson bùird: 5×5 cm. Airson balla/doras: 10×10 cm.
Càit an cuir mi còd QR WiFi?
- Aig an taigh: Magnet air an reothadair no frèam air a' bhalla.
- Cafaidh/taigh-bìdh: Air gach bòrd (còmhla ris a' chlàr-bidhe).
- Taigh-òsta: Anns an t-seòmar air an deasg no mar chairt-taiceil.
- Oifis: Aig an ionad-fàilteachaidh airson luchd-tadhail.
- Fuaim-thaigh: Anns an leabhar-fàilteachaidh — bidh aoighean toilichte.
- Àite-obrach coitcheann: Air a' bhalla ri taobh an doras.
Comhairle proifeiseanta: Cruthaich lìonra aoighean air leth san ruwtair agad (tha FRITZ!Box, Speedport msaa. a' toirt seo mar phàirt dhiubh) agus dèan còd QR dhan lìonra sin a-mhàin. Fanaidh do phrìomh-WiFi prìobhaideach.
Practical example: the guest Wi-Fi of a holiday apartment
A landlady wants guests to get online without having to ask. Her own network should stay private. She proceeds as follows, and you can do the same at home, in a practice or in an office.
- Set up a separate guest network on the router. Most common routers offer this in their settings.
- Give it a clear network name without special characters, for example "Holiday-Apartment-Guest".
- Choose a password that you can change easily. It doesn't have to be short, because it will never be typed.
- Open our generator, select the type Wi-Fi and enter the name and password exactly as they appear in the router. Pay attention to upper and lower case.
- Select the encryption that the router uses for the guest network. If in doubt, it is shown in the router's interface.
- Download the code as a PDF or SVG and print it in the size you need.
- Scan it with a phone that has never been on the network and check whether the connection is established.
Only when this test works should the code go into the folder or the frame. That way you find typos in the name before a guest notices them.
Which settings in the generator really matter
A Wi-Fi code contains the network name, the password and the encryption. Only when all three match the router exactly will the phone connect. A single wrong letter leads to an error message that, for the guest, looks like a broken code.
- Network name: It must match character for character. A trailing space or a difference between upper and lower case is enough to cause an error.
- Password: The longer it is, the finer the pattern becomes. A password made of several random words is secure and still easy to scan.
- Encryption: Use the one your router uses for the guest network. A wrong type prevents the connection.
- Hidden network: Only enable this option if the router really does not broadcast the name.
- Error correction: Level M is enough for printed codes without a logo. For the Wi-Fi code, it is better to leave out a logo so that nothing gets in the way.
- Format: PDF or SVG for table stands and frames, PNG only for screens.
If the password changes, the old code is useless. Then create a new one and swap out all printed copies. Therefore, note every place where a code is hung.
For comparison: a short password creates a coarser pattern, a long one a finer one. For guest networks, a long password is still the better choice, as long as you print the code large enough.
Size, material and placement for table, wall and room
The scanning distance determines the size. Divide it by ten and you get the width of the code. On a table the phone is usually about thirty to forty centimetres away, for which around three to four centimetres is enough. On a wall, at a distance of one metre, you need about ten centimetres.
- Table stand: Around five centimetres is comfortable. Don't place it next to candles or reflective surfaces.
- Frame on the wall: Hang it at eye level, not behind glass that reflects windows or lamps. Anti-reflective glass or a print without a pane is better.
- Folder in the room: Place the code on a flat page, not in a glossy brochure sleeve.
- Laminating: Use a matte film. Glossy film reflects the light back.
- Paper: Matte paper, dark ink on a light background. A light code on dark paper is not recognised by some scanners.
- Quiet zone: At least four squares of free light margin all around, including on the card.
A test print is essential. Hang the sample where it will later hang, and scan from there with two phones.
Security and common mistakes with the Wi-Fi code
A Wi-Fi code contains the password. Anyone who scans it can read it out with suitable apps. So only put a guest network into a code that has no access to your devices. Your main network stays without a code. This is not security advice, but a simple principle.
- Main network in the code: Every guest could read the password. Solution: use a separate guest network.
- Typo in the name: The scan works, but the connection doesn't. Solution: copy the name from the router's interface.
- Password changed, code forgotten: Solution: after every change, create a new code and throw away the old printouts.
- Wrong encryption: Solution: choose the same setting as in the router.
- Notice in public places: Anyone within range can get onto the network. Solution: place the code only where guests really are, and change the password regularly.
Deiseil airson do chòd QR WiFi?
Air a chruthachadh ann an 30 diog, airson a chlò-bhualadh air cairt no stiogair sam bith.
Cruthaich còd QR WiFi a-nis →Ceistean cumanta
Dè na innealan a dh'urrainn còdan QR WiFi a leughadh?
iPhone bho iOS 11 (2017), innealan Android bho Android 10 (2019). Airson innealan nas sine: sganaidh an QR → thèid am facal-faire a shealltainn, cuir a-steach a làimh dhan WiFi.
Dè an crioptachadh a thaghas?
WPA/WPA2/WPA3 for modern routers (the usual case). WEP only for very old routers. "No password" for open hotspots.
An obraich seo le Hidden SSID?
Obraichidh — cuir an roghainn "WiFi falaichte" an comas. An uairsin thèid an t-ainm SSID a chrioptachadh gu soilleir, eadhon ma tha e gun a bhith air a chraoladh.
An tèid mo fhacal-faire a chur gu frithealaiche?
Chan tèid. Air easyfreeqr.com thèid a h-uile càil a chruthachadh anns a' bhrobhsair. Chan fhàg am facal-faire agad an inneal agad idir — eadhon nuair a thèid an còd QR a ghineadh.
What happens if I change the Wi-Fi password?
Then the old code no longer works, because our codes are static and their content cannot be changed afterwards. You create a new code with the new password and swap out the printed copies. Before you do, note every place where a code is hung.
Can a guest see my password?
The password is stored in the code. Anyone who scans it can read it out with the right tool, even if the phone does not show it. So use a guest network with a password you don't use anywhere else, and change it from time to time.
Why doesn't the phone connect even though the scan works?
Usually one detail in the code doesn't match the router: a typo in the name, the wrong upper and lower case, or a different encryption type. Open the router's interface, compare character by character, and create the code again if needed.
Cleachdaidhean co-cheangailte
→ Clàr-bìdh → Cairt-ghnothaich → Bainnse → Barrachd bheachdan WiFi