Criar código QR de Wi-Fi gratuitamente
Wi-Fi para hóspedes sem introduzir uma senha de 20 caracteres. Um scan, um segundo, e já está conectado. Perfeito para casa, café, hotel, escritório ou apartamento de temporada.
Por que usar Wi-Fi com código QR?
Todo mundo conhece a situação: a visita chega, pergunta pelo Wi-Fi, e você dita "M5jk-Großhans-2024-Internet" letra por letra. Com um código QR de Wi-Fi, isso nunca mais acontece:
- O visitante escaneia → já está online. Sem digitação, sem erros de digitação.
- Password stays hidden: Guests don't have to type it in. However, when scanning, the phone can read it, so use a guest network.
- iOS e Android nativamente: desde o iOS 11 e o Android 10, a aplicação da câmara reconhece códigos QR de Wi-Fi automaticamente.
- Gere uma vez — válido para sempre: enquanto a senha do Wi-Fi não mudar, o código QR continua válido.
- Funciona offline: o próprio escaneamento não precisa de internet, pois a senha do Wi-Fi já está codificada no QR.
Em 30 segundos, o seu QR de Wi-Fi para hóspedes
- Introduza o nome da rede (SSID): exatamente como aparece no roteador (maiúsculas e minúsculas fazem diferença).
- Introduza a senha: exatamente como no roteador. Ela não é exibida — apenas codificada no QR.
- Escolha a criptografia: WPA/WPA2/WPA3 (padrão), WEP (antiga) ou "Sem senha" (rede aberta).
- "Wi-Fi oculto": ative se a transmissão do seu SSID estiver desativada.
- Gerar o QR e imprimir: para mesas: 5×5 cm. Para parede/entrada: 10×10 cm.
Onde devo colocar o código QR de Wi-Fi?
- Em casa: íman no frigorífico ou moldura na parede.
- Café/restaurante: em cada mesa (combinado com o cardápio).
- Hotel: no quarto, sobre a escrivaninha ou em um suporte de cartão.
- Escritório: na recepção, para visitantes.
- Apartamento de temporada: na pasta de boas-vindas — os hóspedes agradecem.
- Coworking: na parede ao lado da entrada.
Dica de especialista: crie uma rede separada para visitantes no seu roteador (FRITZ!Box, Speedport e outros já trazem essa função) e gere um QR apenas para ela. Assim, sua rede principal continua privada.
Practical example: the guest Wi-Fi of a holiday apartment
A landlady wants guests to get online without having to ask. Her own network should remain private. This is how she does it, and you can do the same at home, in a practice or in an office.
- Set up a separate guest network in the router. Most common routers offer this in their settings.
- Give it a clear network name without special characters, for example "Ferienwohnung-Gast".
- Choose a password that you can change easily. It doesn't have to be short, since it is never typed in.
- Open our generator, select the Wi-Fi type and enter the name and password exactly as they appear in the router. Pay attention to upper and lower case.
- Select the encryption that the router uses for the guest network. If in doubt, it is shown in the router's interface.
- Download the code as a PDF or SVG and print it at the desired size.
- Scan it with a phone that has never been on the network and check whether the connection is established.
Only when this test works should the code go into the folder or the frame. This way you find typos in the name before a guest notices them.
Which settings in the generator really matter
A Wi-Fi code contains the network name, password and encryption. Only when all three match the router exactly will the phone connect. A single wrong letter leads to an error message that looks to the guest like a defective code.
- Network name: It must match character for character. A space at the end or a difference between upper and lower case is enough to cause an error.
- Password: The longer it is, the finer the pattern becomes. A password made of several random words is secure and still easy to scan.
- Encryption: Use the one your router uses for the guest network. A wrong type prevents the connection.
- Hidden network: Only enable this option if the router really does not broadcast the name.
- Error correction: Level M is sufficient for printed codes without a logo. For a Wi-Fi code, it's better to leave out the logo so nothing gets in the way.
- Format: PDF or SVG for table stands and frames, PNG only for the screen.
If the password changes, the old code is useless. You then create a new one and replace all printed copies. That's why you should note where a code is displayed everywhere.
For comparison: a short password produces a coarser pattern, a long one a finer one. For guest networks, a long password is still the better choice, as long as you print the code large enough.
Size, material and placement for table, wall and room
The scanning distance determines the size. Divide it by ten to get the width of the code. On a table, the phone is usually held at a distance of thirty to forty centimeters, for which about three to four centimeters are sufficient. On a wall, at a distance of one meter, you need about ten centimeters.
- Table stand: About five centimeters is comfortable. Don't place it next to candles or reflective surfaces.
- Frame on the wall: Hang it at eye level, not behind glass that reflects windows or lamps. Anti-reflective glass or a print without a pane is better.
- Folder in the room: Place the code on a flat page, not in a glossy brochure sleeve.
- Laminating: Use a matte film. Glossy film reflects the light back.
- Paper: Matte paper, dark ink on a light background. A light code on dark paper is not recognized by some scanners.
- Quiet zone: At least four squares of free light margin all around, including on the card.
A test print remains essential. Hang the sample where it will ultimately hang, and scan from there with two phones.
Security and common errors with the Wi-Fi code
A Wi-Fi code contains the password. Anyone who scans it can read it with suitable apps. Therefore, only put a guest network into a code that gives no access to your devices. Your main network stays without a code. This is not security advice, just a simple principle.
- Main network in the code: Every guest could read the password. Solution: use a separate guest network.
- Typo in the name: The scan works, but the connection doesn't. Solution: copy the name from the router's interface.
- Password changed, code forgotten: Solution: create a new code after every change and throw away old printouts.
- Wrong encryption: Solution: choose the same setting as in the router.
- Notice in public places: Anyone within range can join the network. Solution: place the code only where guests really are, and change the password regularly.
Pronto para o seu código QR de Wi-Fi?
Criado em 30 segundos, pronto para imprimir em qualquer cartão ou adesivo.
Criar código QR de Wi-Fi agora →Perguntas frequentes
Quais dispositivos conseguem ler códigos QR de Wi-Fi?
iPhones a partir do iOS 11 (2017) e dispositivos Android a partir do Android 10 (2019). Em aparelhos mais antigos: escaneie o QR → a senha é exibida e deve ser digitada manualmente na rede Wi-Fi.
Qual criptografia escolher?
WPA/WPA2/WPA3 for modern routers (the usual case). WEP only for very old routers. "No password" for open hotspots.
Isso funciona com Hidden SSID?
Sim — ative a opção "Wi-Fi oculto". Assim, o nome da rede (SSID) é codificado explicitamente, mesmo quando não é transmitido.
Minha senha é enviada para algum servidor?
Não. No easyfreeqr.com, tudo é criado no navegador. Sua senha nunca sai do seu dispositivo — nem ao gerar o código QR.
What happens if I change the Wi-Fi password?
Then the old code no longer works, because our codes are static and their content cannot be changed afterwards. You create a new code with the new password and replace the printed copies. Make a note beforehand of every place where a code is displayed.
Can a guest see my password?
The password is stored inside the code. Anyone who scans it can extract it with the right tool, even if the phone does not display it. For that reason, use a guest network with a password you don't use anywhere else, and change it from time to time.
Why doesn't the phone connect even though the scan works?
Usually one detail in the code does not match the router: a typo in the network name, incorrect upper and lower case, or a different encryption type. Open the router's interface, compare character by character, and generate the code again if necessary.
Casos de uso relacionados
→ Ementa → Cartão de visita → Casamento → Mais ideias de Wi-Fi