Mã QR cho bất động sản & môi giới
From the sale sign to a virtual tour with one scan. With a QR code on the listing, ad, or construction fence, brokers reach prospective buyers directly on their phones.
5 ứng dụng của mã QR bất động sản
Quảng cáo in và biển hiệu là điều bắt buộc trong kinh doanh bất động sản — mã QR kết nối thế giới in ấn với thế giới số:
- Biển rao bán trước nhà: Biển "Bán nhà" có mã QR dẫn đến file PDF hồ sơ chi tiết. Người quan tâm quét từ vỉa hè mà không cần gọi điện.
- Hồ sơ môi giới (in): Ở mặt sau có mã QR dẫn đến tour ảo Matterport — người mua có thể đi xem trực quan trước buổi hẹn.
- Tin rao căn hộ trên báo: Thay vì 20 dòng chữ, chỉ cần một mã QR dẫn đến hồ sơ trực tuyến đầy đủ với toàn bộ hình ảnh và sơ đồ mặt bằng.
- Biển quảng cáo trên hàng rào công trường mới: Quảng cáo khổ lớn có mã QR dẫn trực tiếp đến biểu mẫu đặt chỗ căn hộ theo bản vẽ.
- Danh thiếp của môi giới: Mã QR với vCard cùng liên kết trực tiếp đến website môi giới — một danh thiếp, ba hành động có thể thực hiện.
Cách tạo mã QR bất động sản trong 3 bước
- Xác định mục tiêu: URL hồ sơ trên Immoscout, trang đích riêng của bất động sản, liên kết tour Matterport hoặc biểu mẫu liên hệ đã điền sẵn.
- Chọn trong trình tạo mã: Loại nội dung "URL", preset "Business" hoặc màu sắc của môi giới (logo ở giữa để dễ nhận biết).
- Printing for weather resistance: UV-resistant film for outdoor signs, standard paper for listings.
Mẹo để có mã QR bất động sản hoàn hảo
- Size depending on distance: Calculate the width from the distance: distance divided by 10, at least about 2 × 2 cm when held in hand.
- Lời kêu gọi hành động rõ ràng: "Quét để xem tour 360°" hoặc "Quét mã QR — xem toàn bộ hồ sơ" giúp giảm rào cản.
- Use UTM tracking: With a separate page per property, you can see which sign leads to which house.
- Đặt logo ở giữa: Có logo của môi giới, mã QR trông chuyên nghiệp và dễ nhận biết — quan trọng với các bất động sản có giá trị cao.
- Mobile-friendly landing page: Scans happen on smartphones. Keep the listing PDF under 5 MB.
- Update the QR code when sold: Link to a dedicated page that you switch to "Sold" yourself, so the sign stays informative.
A sale sign from planning to mounting
Let's take a single-family home that a broker is selling. The sign hangs on the garden fence, prospective buyers walk past on the sidewalk or stop by car. The code should take them without detours to photos and floor plan. Here's how to proceed.
- Create a dedicated page for the property on your brokerage website, with a short address such as yourfirm.de/house-12. It contains photos, floor plan, key facts, and your contact details.
- Open the page on your phone. It must be readable without zooming and load quickly.
- In the generator, select the content type Website (URL) and paste the short address.
- Set error correction to H if your broker logo goes in the center. Make the code dark on a light background.
- Download the code as SVG or PDF and give the file to your print shop.
- Have a test copy printed at actual size and scan it from the distance at which prospective buyers will later stand: from the sidewalk, from the street, from the car.
- Only mount the sign once two different phones read the code reliably.
For each additional property, create a new page and a new code. That way, every sign leads exactly to its own house.
Which QR type and settings fit
For almost everything in real estate, you use the Website (URL) type. The other types have their place, but only in specific situations.
- Website (URL): For listing, photo gallery, 360-degree tour, and inquiry form. This is your standard for sign, construction fence, and ad.
- Contact (vCard): For the back of your business card. Keep the fields brief: name, phone, email. The more fields, the larger and finer the code.
- Phone or WhatsApp: Useful when prospective buyers should call or message right away, for example on a rental notice.
- Location: Practical as the meeting point for a viewing when the property is hard to find.
- Error correction: Without a logo, level M with about 15% is enough. With a logo in the center, use H with about 30%.
- File format: SVG or PDF for everything printed. PNG only for screens, for example an online listing.
Keep the address behind the code short. A short address produces a coarse, robust pattern that remains readable even on a wet sign. Long addresses with many additions make the pattern fine and prone to errors. Also keep the logo small so that as much of the pattern as possible remains visible.
Size, distance, and material for sign, listing, and construction fence
The size depends on the distance from which it is scanned. Rule of thumb: the width of the code roughly equals the scanning distance divided by 10. Plan for the distance that occurs in practice, not the one that would be convenient for you.
- Listing and business card: Scanned by hand, about 2 × 2 cm is the minimum. Use more if space allows.
- Sign on the garden fence: If someone stands about 2 m away on the sidewalk, they need a code about 20 cm wide.
- Construction fence poster: At a distance of about 5 m, about 50 cm is needed. A poster offers enough space for this.
- From the car: People driving past rarely scan. Place the code where cars stop, and plan the distance generously.
- Quiet zone: Leave a light margin of at least four modules all around. Frames or text directly next to the code interfere with scanning.
- Material: Outdoors, weather resistance matters. Ask your print shop for UV-resistant films or rigid foam boards and for a matte finish, because gloss reflects in sunlight.
Hang the sign so that the code is comfortably in front of the phone, roughly at chest to eye level. A code at the top of the fence post becomes a photo taken from below and scans poorly.
The most common mistakes with property codes
Most problems do not come from the code itself, but from what happens behind it or around it.
- The target is not mobile-readable. A listing PDF with tiny text frustrates people on their phones. Solution: a page that works on smartphones, with the PDF only as an additional download.
- The code is too small for the distance. Solution: measure the distance, divide by 10, and make a test print.
- The property is sold, but the sign is still up. Our codes are static, and their target cannot be changed. Solution: link to a dedicated page that you switch to "Sold" yourself. That way the sign stays informative.
- One code for all properties. Prospective buyers land on an overview instead of their house. Solution: a separate page and a separate code for each property.
- No hint next to the code. Passersby don't know what to expect. Solution: a short, easy-to-read sentence such as "Scan and view the floor plan."
Sẵn sàng tạo mã QR bất động sản của bạn?
Với preset "Business" hoặc màu sắc của môi giới, tải xuống định dạng SVG & PDF độ phân giải cao.
Tạo mã QR ngay →Câu hỏi thường gặp
Mã QR trên biển rao bán cần kích thước bao nhiêu?
Calculate the width from the distance: distance divided by 10. In hand, about 2 × 2 cm is enough; on the sidewalk, about 20 cm. Construction signs: 20×20 cm.
Mã QR khi bán nên dẫn đến đâu?
File PDF hồ sơ chi tiết, tour ảo (Matterport, EyeSpy360) hoặc biểu mẫu liên hệ. Chỉ đưa số điện thoại sẽ bỏ lỡ nhiều cơ hội.
Có đáng để đặt mã QR trên tin rao căn hộ không?
For print, it is useful because readers scan from the paper and go straight to the online property listing. Less relevant online.
Mã QR có cần chịu được thời tiết không?
Absolutely. UV-resistant film or laminated directly onto the sign. Otherwise prints can fade in the sun.
What happens to the sign when the property is sold?
The code stays as it is, because our codes are static and cannot be changed afterwards. That is why you link from the start to a dedicated page of your office. You switch that page to "Sold" or show similar properties there. The sign can then stay up.
Do I need a separate code for each property?
Yes, if each code should lead directly to the matching property. You create a separate page for each property and generate a code for it. This costs nothing with us and requires no registration. Label the files with the property number so you don't mix them up later.
Which error correction should I use with a broker logo in the center?
Use level H. It restores about 30% of the data and thus compensates for the area covered by the logo. Still keep the logo small, and test a print with two different phones before ordering signs or listings in larger quantities.
Thêm ứng dụng mã QR khác
Thêm nhiều ý tưởng trong Thư viện của chúng tôi: